Bogen NQ-S1810CT-G2 Configuration Manual page 10

1 On the appliance web UI's main page, select Network Settings.
2 Select your desired network settings.
3 Select Save.
Network settings are described in the following table:
IP Address
Netmask
Gateway
VLAN ID
Figure 4. Network Settings
Table 4. Network Settings
Identifies the IP address assigned to the appliance.
Identifies the subnetwork subdivision of an IP net-
work.
Identifies the address, or route, for the default gate-
way.
Identifies the Virtual Local Area Network (VLAN) for
this appliance. Values range from 0 to 4094.
8