Bogen NQ-S1810CT-G2 Configuration Manual page 17

Table 6. Configuration Settings (Standalone enabled)
Device Type
Device Name
Web Username
Web Password
Web Confirm Password
Time Zone
Output Power (Watts)
Enable SIP Calls
External Relay Trigger
a
SIP Server Address
a
SIP Codecs
a
SIP Extension
a
SIP Network Port
a
SIP User Name
a
SIP Password
a
Type
Displays the type of this device.
Provides a name for this device.
Specifies a web username for this appliance.
Specifies a web password for logging into the appliance.
Re-enter the password used to log into the appliance.
Specifies the time zone in which the device resides.
Specifies the output power for the amplifier in Watts.
Valid values are: 1/8, 1/4, 1/2, 1, 2, 4, and 8.
Enables this device to receive one-way SIP calls, wherein
only the caller can be heard (such as announcements). If
enabled, a number of SIP-related configuration settings
are displayed.
Enables/disables the activation of the NO/NC output relay
to notify an external device that an audio signal is being
sent to the VoIP speaker.
Specifies the IP address of the SIP Registration Server with
which the device will register.
Displays a read-only list of codecs allowed on SIP sessions.
Specifies the SIP extension for this device.
The extension, along with the IP address, is used to specify
the URI used to place a SIP call to this extension:
sip:<extension>@<local_ip_address>
Specifies the IP port on which to communicate with the
SIP Registration Server (typically 5060).
Specifies the SIP user name used to register with the SIP
server.
Specifies the SIP registration password used to register
with the SIP server.
Specifies how the device will be used. Options are:
• VoIP Speaker Only
• Digital Call Switch & Speaker
15