Bogen NQ-S1810CT-G2 Configuration Manual page 18

Table 6. Configuration Settings (Standalone enabled)
a
Dial Extension
Intercom Cut Level
a. Available only when
The following parameters appear for each Multicast Address configured for this device.
Multicast IP Address
Multicast Port Number
Only available when
Speaker, this indicates which extension will be called when
the call button is activated.
a
Specifies the output level of the speaker.
This can be a value from
The default value is
Note: To modify, click on the value, adjust the slider on the popup
using the cursor keys or mouse, and click the check box button.
Enable SIP Calls has a value of Yes.
Specifies the multicast IP address on which to receive
audio streams.
Specifies the multicast port on which to receive audio
streams.
Type is set to Digital Call Switch &
42 and 0 dB.
−
6 dB.
−
16