Standalone Operation Configuration Settings - Bogen NQ-S1810CT-G2 Configuration Manual

Standalone Operation Configuration Settings

Configuring this device consists of specifying one or more of the following:
• The SIP server addresses, ports, and SIP extensions at which to register for incoming
SIP calls.
• The input multicast (Receive) addresses (and ports) from which the device will receive
encoded signals, which will then be converted to analog and played to the speaker.
To receive networked audio, configure one or more
entries with the multicast addresses, ports, and codecs from which to receive the encoded
streams. Specify the cut level for the speaker output channel.
Multicast Addresses (Receive)
13