Display Contrast Adjustment (St7000 Only); Permanent Watch Alarm (Sfia); Recording Calibration Settings; Chapter 4: Calibration 8 - Raymarine Autohelm 100 Install Manual

Raymarine autohelm 100: install guide
Table of Contents

Advertisement

90

4.5 Display Contrast Adjustment (ST7000 only)

4.6 Permanent Watch Alarm (SFIA)

4.7 Recording Calibration Settings

The contrast of the LCD display can be adjusted to suit a wide range of
viewing angles.
• Press Display and Track together momentarily.
30
RUDDER
20
10
0
• Press Response ( ) to increase contrast (suits viewing from below).
• Press Response ( ) to decrease contrast (suits viewing from above).
To store the contrast selection, press Display and Track together
momentarily.
If a permanent watch alarm is required, please contact the Autohelm
Product Support Department or an authorised dealer for further informa-
tion.
Having fined tuned the calibration settings during initial sea trials, record
them in the following table for future reference.
Type 100/300 Operation and Installation Handbook
30
20
10
Cal.
Decrease
contrast ratio
Normal
viewing
position
Increase
contrast ratio
D1017-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autohelm 300

Table of Contents