Rate Level; Rudder Offset (Helm Adjust); Rudder Limit - Raymarine Autohelm 100 Install Manual

84

Rate Level

Rudder Offset (Helm Adjust)

Rudder Limit

Rate level controls the amount of rudder the pilot will apply to reduce the
speed at which the vessel is turning. This is also known as counter rudder,
and is only used in response level 3.
The settings available are as follows:
Range
Recommended
setting
Rudder Offset sets the control head to read zero degrees of rudder when
the helm is positioned amidships.
The range available is as follows:
Range
Default Setting 0
Rudder Limit restricts autopilot rudder movement to just less than the
steering systems mechanical stops. This avoids putting the steering
system under unnecessary load.
The range available is as follows:
Range
Default setting 30 degrees
Type 100/300 Operation and Installation Handbook
1 to 9
7 (Displacement)
7 (Semi displacement)
7 (Planing)
5 (Stern drive)
-7 to +7 degrees
15 to 40 degrees
81004-18
81004-19
81004-20