Indoor color mini dome camera, outdoor day/night 3-axis vandal dome camera, outdoor color 3-axis vandal dome camera, outdoor day/night ir 3-axis vandal dome camera, outdoor day/night mini bullet, indoor color non-functioning side view smoke detector camer (14 pages)
Outdoor ip66 mobile ir mini ball camera. 720tvl high resolution (15 pages)
Summary of Contents for EverFocus EMN2260
Page 1
The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw...
IR LEDs IR LEDs for infrared illumination in night vision applications. Lens Camera Lens. Insert a micro SD card. Please go to the product page on Micro SD Card Slot EverFocus website to see the latest Storage Compatibility List. http://www.everfocus.com.tw Dimensions...
Page 3
2. Contact the shipper if any items appear to have been damaged in the shipping process. Optional Accessory You can go to the product page on EverFocus’ website to check the related optional accessories. Please click Accessories on each Product page on EverFocus Website www.everfocus.com.tw...
Note: To activate Audio function, the Audio function must be enabled please refer to 5.5.2 Video Streaming. 3. Installation 1. Before screwing the camera to the wall, stick the supplied Mounting Sticker on the wall / ceiling to mark the position for installation. Drill four holes on the wall / ceiling according to the supplied sticker and push the supplied four Screw Anchors into the four holes on the wall / ceiling.
Page 5
2. Check that the holes of the Mounting Sticker are correct. Wall / Ceiling 3. There are two ways to tread the cables: a. Through the wall / ceiling: run the cables through the hole on the wall / ceiling. Wall / Ceiling b.
Page 6
a. Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through the supplied Waterproof Ring, Cable Gland, Stopper and Screw Cap accordingly. Stopper Screw Cap Waterproof Ring Cable Gland b. Connect the RJ-45 cable to the LAN/PoE Cable of the camera. RJ-45 Cable LAN/PoE Cable c.
Page 7
7. Use two supplied Small Screws to lock the camera base and the mounting plate. 8. Optionally insert a micro SD card into the card slot (please refer to 2. Physical Description). 9. Remove the screw to adjust the pan / tilt / rotate angles of the lens. 10.
Page 8
11. After adjusting the direction and angle of the lens, tighten the upper cover screws. Wall / Ceiling 12. The installation is complete. Wall / Ceiling 4. Accessing the Camera You can look up the IP address of the IP camera using the IP Utility (IPU) program, which is included in the software CD.