EverFocus EMN Series User Manual page 52

Shutter (Manual): The function is only activated if you select ALC or Manual in the Mode field. If

enabled, this setting lets you set the shutter speed yourself (measured in fractions of a second).
AGC (Manual): The function is only activated if you select Manual in the Mode field. Set the Auto

Gain Control limit here. The lower the AGC level, the lower the video signal and the noise.
Slow Shutter: The function is only activated if you select Auto in the Mode field.

AGC: The function is only activated if you select Auto or ALC in the Mode field. Set the Auto Gain

Control limit here. The lower the AGC level, the lower the video signal and the noise.
Flickerless: The function is only activated if you select Auto in the Mode field. Choose between

OFF, 50HZ, 60HZ, 50HZ (High Luminance) or 60HZ (High Luminance).
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
【Day/Night Settings】
Mode: Select a mode from the drop-down list.

Auto: Select to let the camera automatically switch to Night mode (black and white images)
•
when the light levels fall to a specified level, and back to Day mode (color images) when the
light levels rise to a specified level.
Day: Select to keep the camera in Day mode (color images), even in nighttime.
•
Night: Select to keep the camera in Night mode (black and white images, even in daytime.
•
Schedule: Select to let the camera to switch to Day mode or Night mode based on the day and
•
night schedule settings (see 7.2.3 Schedule).
D/N Level: The value represents the AGC level. Adjust the level for the camera to switch between

Day mode and Night mode based on the configured value. Note that the level should be less than
the AGC limit configured in the Exposure Settings field. For example, if you configure 10 for the
AGC limit, and 14 for the D/N level, the D/N level will be inactivated as the AGC limit has set up
between 0 and 10.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
【Backlight Compensation Settings】This function is useful when the background of the subject is very
bright and the subject itself is dark.
BLC Edit Mode: Click the Enable button, the BLC grids appear on the image. Click on the grids to

enable / disable the BLC function. The selected grids (in green) will be applied with the BLC
function. Click Apply to apply the changes or Cancel to cancel the changes and return to the
previous settings.
EMN Series Mini Mobile IP Dome
46