Advertisement
3. Installation
3.1 Installation and Adjustment
1.
Stick the Template Plate on the position where you want to attach the camera.
2.
Drill three holes on the template for screwing the camera with the supplied screws and
anchors. If you wish to run the wires through the wall / ceiling, drill an additional hole in
the middle of Template Plate.
3.
Insert the supplied Plastic Anchors into the holes.
4.
Remove the Camera Cap from the Camera Body.
5.
Attach the camera body to the correct position and then screw the camera body to the
wall / ceiling using the supplied three Screws.
ECD900F eZ.HD Mini Dome Camera
7
Advertisement
