7.2.2 Camera
Day / Night: Select Day to configure the following settings for daytime and select Night to configure
the following settings for nighttime. Click the Apply button to save the settings.
【Exposure Settings】 This function can only be set up in the Advanced tab. This setting is used to adapt
to the amount or type of light used by the camera.
Mode: Select a mode from the drop-down list.
Auto: Selecting Auto for the camera to automatically adjust the Shutter based on the
•
measured light level.
ALC (Shutter Priority): Selecting ALC (Automatic Light Control) allows the camera circuitry to
•
either take bright spots more into consideration (peak), bringing out detail in bright areas, or
less into consideration (average) bringing out detail in shadows.
Manual: Select this option to manually set up the Shutter (Manual) and AGC (Manual) values.
•
EMN Series Mini Mobile IP Dome
45