EverFocus EMN Series User Manual page 21

5. Speaker / Microphone
Click the Speaker and Microphone buttons to switch the sound on/off for the speaker and
microphone respectively (if such external devices have been connected to the camera directly or via
the network). To activate the Audio function, the Enable Audio must be selected. See Audio Settings
in 7.2.1 Streaming and Audio. Note that the Speaker function is not available for this camera.
6. Click the Setting button
7. Click the Wizard button
8. Hallway Display (9:16): Click the Rotate button
users to monitor vertically-oriented areas such as hallway, corridors and aisles. It's recommended to
select a 16:9 View Size (e.g. 1920x1080 / 1024x768) to achieve the best display effect.
9. Video Stream
Select the Video Stream (Stream 1, Stream 2 or Stream 3) that will be displayed in the video box on
the bottom. Stream 2 and Stream 3 are only selectable if you have enabled the stream. The default
setting is Stream 1 only. See 7.2.1 Streaming and Audio.
10. View Size
Use this to select the appropriate view size and shape of the video box on the bottom. A smaller size
might increase transmission speed and video quality.
11. Language
Click the Language drop-down list to select the desired language.
12. Digital Zoom
Click to zoom in / out the camera view up to 10x. Clicking on a magnified image will
re-center the image around that point.
to enter the Settings page (see 7. Settings).
to enter the Setup Wizard.
15
EMN Series Mini Mobile IP Dome
to rotate the live image. This function allows