Advertisement
1.4 Optional Accessory
BA-E310
1.5 Cable Description
2. Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 3 screw
positions. Drill 3 holes on the surface and insert the supplied 3 Screw Anchors
into the screw holes. If you want to run the cable through the surface, drill a
hole within the 3 screw area.
2. To mount the camera to the surface, screw the Camera Base to the surface
using the supplied 3 Screws.
3. Connect the Power Cable to a 12VDC power source. Connect the Video
Output Cable to a monitor or DVR.
4. You can use the Joystick on the cable to configure camera OSD settings.
Remove the Protection Cap from the Joystick before using it.
All manuals and user guides at all-guides.com
Color / Material: White / Metal
Size (Φ x H): 101 x 52mm / 3.98"x 2"
Weight: 540g / 1.2lb
12VDC
Video Output Cable (BNC, 75Ohm)
Screws
Power Cable
Camera Base
Screw Anchors
2
Mounting
Surface
Advertisement
