EverFocus EMN Series User Manual page 12

5. Connect the network, power and audio cables to the camera.
You can optionally use the supplied Cable Gland to connect the camera to the network for water
proofing:
a. Remove the Screw Cap from the Cable Gland.
Screw Cap
b. Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through the Cable
Gland and Screw Cap. Note that the
5mm to 5.7mm.
c. Place the Waterproof Ring into the LAN/PoE cable. Connect the RJ-45 network cable to the
LAN/PoE cable.
d. Tightly screw the Cable Gland and Screw Cap to the LAN/PoE cable.
e. Crimp the RJ-45 connector onto the network cable. Note that the wires should be placed into
the RJ-45 connector based on the following order (from left to right).
Orange with white stripe
Orange
Green with white stripe
Blue
Blue with white stripe
Green
Brown with white stripe
Brown
Cable Gland
diameter of the network cable should be ranging from
RJ-45 Cable Waterproof Ring
6
EMN Series Mini Mobile IP Dome
LAN/PoE Cable