6.7. Bartacking
No.
Pattern
032
033
Bartacking is used to reinforce the part of the seam that is likely to ravel.
* The length of the bartack is determined by pushing the reverse stitch button, but it will automatically make a
u-turn when it reaches the maximum of 20 stitches.
* If the presser foot cannot be parallel to throat plate, use filler fabric or cardboard.
Example of use)
❷
79
Manual buttonhole presser foot (I)
Leave the machine in Lock mode
Trousers
and skirt
❶
Presser foot
Bag
1
Pass the needle thread through the
presser foot.
❶ 10 cm
2
Place the fabric
Pocket
❷
under the presser foot.