Preparing For Rides On Dry Sand; Preparing For Rides On Wet Sand - KTM 450 SX-F 2018 Owner's Manual

7 PREPARING FOR USE
–
Clean and dry the connector, or change it if necessary.
Difficult riding conditions are:
–
Rides on dry sand. (
–
Rides on wet sand. (
–
Rides on wet and muddy surfaces. (
–
Rides at high temperature and slow speed. (
–
Riding at low temperature and in snow. (
7.5

Preparing for rides on dry sand

7.6

Preparing for rides on wet sand

p. 20)
p. 20)
p. 21)
p. 21)
p. 21)
–
Fit a dust cover on the air filter.
Dust protection device for air filter (79006920000)
102136-01
–
Fit a sand cover on the air filter.
Sand protection device for air filter (79006922000)
102138-01
–
Clean the chain.
Chain cleaner (
–
Fit the steel sprocket.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
600868-01
–
Fit a rain cover on the air filter.
Waterproofing device for air filter (79006921000)
102137-01
–
Clean the chain.
Chain cleaner (
–
Fit the steel sprocket.
600868-01
Info
See the KTM PowerParts fitting instructions.
Info
See the KTM PowerParts fitting instructions.
p. 109)
Tip
Do not grease the chain.
Info
See the KTM PowerParts fitting instructions.
p. 109)
Tip
Do not grease the chain.
20