16
TUNING THE ENGINE
16.8
Adjusting the basic position of the shift lever
–
Sit on the vehicle in the riding position and determine distance
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
»
If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
400692-10
–
Remove screw
401950-12
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Mount and tighten screw
401951-10
Guideline
Screw, shift lever
1
with the washers and take off shift lever
A
of the shift lever and shift shaft.
1
with washers.
M6
A
between the
10... 20 mm (0.39... 0.79 in)
(
p. 88)
2
.
14 Nm
Loctite
(10.3 lbf ft)
88
®
243™