Table of Contents
Advertisement
12
BRAKE SYSTEM
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
12.6
Checking the front brake linings
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be glad to help.)
Preparatory work
–
Check the front brake linings. (
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
F00149-10
–
Add brake fluid to level
Guideline
A
Level
voir rim)
Brake fluid DOT 4 / DOT 5.1 (
400379-10
–
Position cover
Info
Clean up overflowed or spilled brake fluid immediately with water.
F00149-10
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the front brake linings.
–
Check the brake linings for damage and cracking.
»
If damage or cracking is visible:
–
Change the front brake linings.
H01333-10
p. 66)
1
.
2
with membrane
3
.
A
.
(brake fluid level below reser-
p. 107)
2
3
with membrane
A
5 mm (0.2 in)
. Mount and tighten screws
A
.
≥ 1 mm (≥ 0.04 in)
(
p. 67)
(
p. 67)
66
1
.
Advertisement
Table of Contents
