Preparing For Rides On Dry Sand - KTM 150 XC-W 2018 Owner's Manual

8 PREPARING FOR USE
8.5
38

Preparing for rides on dry sand

M01129-01
M01104-01
M01105-01
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the required
value:
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
–
Fit a dust cover on the air filter.
Dust cover for air filter (79006920000)
Info
See the KTM PowerParts fitting instructions.
–
Fit a sand cover on the air filter.
Sand cover for air filter (79006922000)
Info
See the KTM PowerParts fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
Your authorized KTM workshop can recommend the
right carburetor tuning.
1.8 bar (26 psi)