Duplex Unit Switch Settings - Omron SYSMAC CVM1 Series Operation Manual

Duplex Unit Switch Settings

2-2

Duplex Unit Switch Settings

14
5. Memory Card Power Switch
Press and release this switch to turn the power to the Memory Card off and
on. The M/C ON indicator will be lit when the power is on. Never remove the
Memory Card while the power is on. The Memory Card will not function
when the M/C ON indicator is not lit.
The Memory Card power switch also controls the simplified backup func-
tion. Press and hold the switch for 3 seconds to start the backup. Refer to
2-4-3 Simplified Backup Function for details.
6. Memory Backup Battery
Verify that the backup battery is installed before operating the PC.
Some Duplex Unit switch settings are required before programming and others
are required before starting operation.
1. Left CPU Usage
Switch
2. Duplex/Simplex
Mode Switch
3. Active CPU
Switch
4. Initialize
Button
5. Peripheral
Connector
CVM1D-DPL01 Duplex Unit
Section 2-2
1. Right CPU
Usage Switch
6. Communications
DIP Switch
7. Host Link
Communications
Selector
8. Host Link
Connector