en Home Connect
15.3 Home Connect menu
The Home Connect menu contains
all of the Home Connect settings.
Calling up the Home Connect
menu
Press and hold Remote Start for
▶
at least 3 seconds.
a The display shows the first setting
of the Home Connect menu.
Navigating in the Home Connect
menu
Briefly press Remote Start until
▶
the display shows the required set-
ting.
Exiting the Home Connect menu
Press and hold Remote Start for
▶
at least 3 seconds.
15.4 Activating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up. → Page 36
¡ The display shows "oFF".
Press
to change the setting.
▶
a The display shows "on" if the Wi-Fi
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows "on" and the
signal strength of the Wi-Fi connec-
tion.
15.5 Deactivating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up. → Page 36
¡ The display shows "on".
36
Press
to change the setting.
▶
a The display shows "oFF" if the Wi-
Fi is deactivated.
15.6 Resetting the appliance
network settings
Requirements
¡ The Home Connect menu is called
up. → Page 36
¡ The display shows rEs.
Press and hold
▶
3 seconds.
a The network settings are reset.
15.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start will be deactivated in
the following circumstances:
¡ The appliance door is opened.
Remote Start is pressed.
¡
¡ Following a power cut.
Activating remote start
Requirement: The appliance door is
closed.
Press Remote Start.
▶
a Remote Start lights up and the
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Press Remote Start.
▶
a Remote Start goes out.
15.8 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
for at least