Table of Contents
Advertisement
LCD Bezel and Back Cover Assembly
Removing the LCD with bezel and the display back cover assembly
1. Follow the procedure in
2. Remove the:
a.
Batteries
b.
Bottom chassis cover
c.
WLAN card
d.
WWAN card
e.
PCIe heatsink assembly
f.
Docking port assembly
g.
Heatsink
h.
Hinge covers
i.
Display assembly
3.
CAUTION:
Four M2.5 screws on the bottom near the hinges are epoxy coated screws. Exercise caution when
loosening the screws, to avoid a possible stripped screw head.
Loosen the 12 'M2.5' screws from the back cover.
4.
CAUTION:
The following epoxy screw locations will require additional focus. These screws are difficult
to remove and there may be damage during the removal process. To prevent damage to the screws and
surrounding plastics, please use the correct screwdriver for each screw type.
Remove the four 'M2.5' epoxy screws securing the bezel to the back cover [1] and pry at bottom edge to separate the two
subassemblies [2].
Before working inside your
computer.
Removing and installing components
103
Advertisement
Table of Contents
