Table of Contents
Advertisement
About this task
Steps
1. Connect the battery cable to the connector on the battery.
2. Close the latch on the battery cable connector to secure it to the battery.
Memory modules
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Enter
service
mode.
4. Remove the
base
cover.
About this task
The following images indicate the location of the memory module and provides a visual representation of the removal procedure.
NOTE:
Depending on the configuration ordered your computer may come shipped with one or two memory module
installed.
before working inside your
computer.
Removing and installing components
27
Advertisement
Table of Contents
