Checking The Headlight Setting; Adjusting The Headlight Range - KTM 690 SMC R 2017 Owner's Manual

14 ELECTRICAL SYSTEM
14.12

Checking the headlight setting

14.13

Adjusting the headlight range

–
Position the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
Distance
–
Position the vehicle vertically at a distance
Guideline
Distance
400726-10
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (

under the first mark.


p. 135)
5 cm (2 in)
 away from the wall.
5 m (16 ft)
p. 135)
135