Table of Contents
Advertisement
12
BRAKE SYSTEM
12.9
Checking rear brake fluid level
Warning
Danger of accidents An insufficient brake fluid level will cause the brake system to fail.
If the brake fluid level drops below the MIN marking, the brake system is leaking or the brake linings are worn down.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized KTM workshop will be glad
to help.)
–
Loosen fittings
–
To adjust the basic position of the foot brake lever individually, loosen nut
screw
Info
The range of adjustment is limited. The screw must be screwed into the footrest
bracket by at least four turns.
–
Position foot brake cylinder
travel.
–
Mount and tighten fittings
Guideline
Screw connection, foot brake cylinder
–
Check the free travel of the foot brake lever. (
–
Tighten nut
101991-10
on foot brake cylinder
accordingly.
so that the foot brake lever has the necessary free
.
.
.
M6
10 Nm (7.4 lbf ft)
p. 96)
98
and turn
Advertisement
Table of Contents
