Table of Contents
Advertisement
10
TUNING THE CHASSIS
10.9
Adjusting the handlebar position
–
Remove screws
one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
–
Place the handlebar support in the required position. Mount and tighten screws
601875-10
Guideline
Screw, handlebar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount screws
Guideline
Screw, handlebar clamp
. Take off the handlebar clamps. Remove the handlebar and lay it to
. Remove the handlebar support.
M10
Loctite
40 Nm
(29.5 lbf ft)
and tighten evenly.
M8
20 Nm
(14.8 lbf ft)
69
.
243™
®
Advertisement
Table of Contents
