Appliance Handling Safety; Electrical Safety - Thermador Professional Pro Grand Series Installation Manual

IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Verify that cabinets above the cooktop are a maximum
▶
of 13" (330 mm) deep.
WARNING
DO NOT install this appliance outdoors.
WARNING
Remove all tape and packaging before using the
appliance.
Dispose of packaging in an environmentally responsible
▶
manner.
▶ Never allow children to play with packaging material.
Store small parts safely as they can be a choke hazard.
▶
WARNING
To avoid possible burn or fire hazard, a backguard
designed specifically for this appliance should be installed
whenever the appliance is used.
CAUTION
This unit is designed as a cooking appliance. Based on
safety considerations, never use it for warming or heating
a room. Doing so may result in carbon monoxide
poisoning and overheating the appliance.
1.3 Appliance handling safety
WARNING
Unit is heavy and requires at least two people or
proper equipment to move.
Do not lift appliance by door handle.
▶
Do not lift the appliance by the oven control panel.
▶
▶ Remove the door for easier handling and installation.
See instructions in this manual.
WARNING
Hidden surfaces may have sharp edges.
▶ Use caution when reaching behind or under appliance.
▶ Wear gloves to avoid cutting fingers on sharp edges
during installation.
1.4 Electrical safety
Installer - show the owner the location of the circuit
¡
breaker or fuse. Mark it for easy reference.
If required by the National Electrical Code (or Canadian
¡
Electrical Code), this appliance must be installed on a
separate branch circuit.
The appliance, when installed, must be electrically
¡
grounded in accordance with local codes or, in the
absence of local codes, with the National Electrical
Code, NFPA 70 latest edition, or the Canadian
Electrical Code, CSA C22.1 latest edition.
Refer to the rating plate for more information.
¡
WARNING
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned
▶
ON accidentally.
For appliances equipped with a cord and plug, do not cut
or remove the ground prong.
It must be plugged into a matching grounding type
▶
receptacle to avoid electrical shock.
▶ If there is any doubt as to whether the wall receptacle is
properly grounded, the customer should have it
checked by a qualified electrician.
WARNING
ELECTRIC SHOCK HAZARD
Disconnect power before installing or servicing. Before
▶
turning power ON, be sure that all controls are in the
OFF position.
▶ DO NOT remove connections.
▶ DO NOT use an extension cord.
Improper grounding can result in a risk of electric
▶
shock.
▶ Failure to follow these instructions can result in death,
fire, or electrical shock.
GROUNDING INSTRUCTIONS
This appliance must be grounded.
▶
Grounding reduces the risk of electric shock by
▶
providing a safe pathway for electric current in the
event of a short circuit.
▶ Be sure your appliance is properly installed and
grounded by a qualified technician.
▶ Installation, electrical connections and grounding must
comply with all applicable codes.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet near
the appliance.
Before you turn on power supply, make sure all controls
are in the OFF position.
en-us
5