Installing The Leg Covers - Pro Grand® Models; Reinstalling The Oven Door - Thermador Professional Pro Grand Series Installation Manual

Hide thumbs Also See for Professional Pro Grand Series:
Table of Contents

Advertisement

Available languages

Available languages

en-us Installation procedure
The toe kick panel should maintain a minimum ½''
(12.7 mm) clearance above the floor.
8.5 Installing the leg covers - Pro Grand®
models
Remove plastic coverings from the stainless steel
1.
covers.
Beneath the range, wrap the leg cover assembly around
2.
the leg. Insert the leg cover tabs into the tab slots, as
shown.
Repeat for all visible legs.
3.
Tip: If additional leg covers are required, you can order
them from Customer Service by calling 1-800-735-4328 at
no charge for up to one year after purchase date of the
appliance.
8.6 Reinstalling the oven door
Hold the door firmly in both hands.
1.
Hold the door at a 30° angle from the closed position.
2.
Insert hinges centered evenly into the hinge slots. The
hinges will securely hook into the slots when properly
installed. DO NOT force, bend or twist the door.
Open door fully to expose hinges, levers, and slots.
3.
24
Flip the hinge until seated on the bracket. A screwdriver
4.
may be required to carefully push the clip.
Close and open the door slowly to ensure it is correctly
5.
and securely in place.
Checking door fit and adjustment
Open and close the door slowly to test the movement
1.
and the fit of the door to the oven cavity. DO NOT force
the door to open or close. If the door is properly
installed, it should move smoothly and rest straight on
the front of the range when closed.
The range must be level for proper alignment of the
2.
oven doors. Refer to the section on adjusting the
leveling legs.
Verify that the hinges are properly seated into the hinge
3.
slots, and that the hinge clips are fully engaged into the
slots.
If door or handle appears slightly tilted:
4.
Rotate the large star-head screw located directly
above the hinge receiver with a T-30 star-head driver.
Rotate each screw respective to its side and direction
the door needs to be adjusted.
Note: The steam oven door is not adjustable

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents