Toe Kick (Plinth Removal) - Miele G2000 Technical Information

Technical Information
Figure 5-17: Door Seal Installation
1. Open the door.
2. Remove the old seal.
3. Clean the groove around the cabinet.
Note
Coating the seal with water may simplify fitting,
4. Refer to Figure 5-17.
5. Press the new seal in the groove, starting at corners (positions 1).
6. Press the middle of seal (positions 2) into the groove under the locking plate,
while pressing the seal into the corners.
7. Press the remaining part of the seal into the groove working upwards in the
direction of the arrows (positions 3).
Note
Coating the seal with water may simplify fitting,
5.3.2

Toe Kick (Plinth Removal)

G1000 / G2000 Dishwashers
74