Miele G2000 Technical Information page 142

Technical Information
Flashing
Rhythm of
Function Programming
Intake/Drain
Lt.
Long Short
Pos. 12:
Reset to
factory
1 2
setting
Pos. 20: Set
Long Short
the wash
temperature
2 -
Table 6-25: G1180 / G2180 Programming Mode Options (Cont. from Table 6-24) (Cont. on Table 6-26)
Press the The Intake/Drain
Program button LED flashes 1x long
12x and 2x briefly
intermittently. With
To reset all this programming
parameters to function, all
factory setting, parameters that can
press the be modified by the
Program button customer can be
and hold it until reset to the factory
the Intake/Drain
setting.
LED flashes.
Then press the If the SaniWash LED
Program button is off, the values are
to enter the not at the factory
desired setting setting. If the
changes. *2 SaniWash LED
flashes, all values
correspond to the
factory setting.
Press the The Intake/Drain
Program button LED flashes 2x long
20x intermittently.
To change the The SaniWash LED
setting, press the is off = normal wash
Program button temperature; the
and hold it until SaniWash flashes =
the Intake/Drain increased wash
LED flashes. temperature with a
Then press the resulting running time
Program button extension.
to enter the
desired setting
changes. *2
142
G1000 / G2000 Dishwashers
Flashing Rhythm of
Indication
SaniWash LED
Long Short Display
-
-
Long Short Display
-
-
- P0
1 P1
- P0
1 P1