Miele G2000 Technical Information page 185

G1000 / G2000 Dishwashers
Function
Temperature
setting
Buzzer
activation /
deactivation and
volume setting
Audible
confirmation
signal activation
/ deactivation
Brightness
setting
Memory
activation /
deactivation
Dealer
demonstration
mode activation.
Factory Default
Wash/Final rinse
temperature
modification
(from software
version ID no.
984).
Main wash Make the desired selection and
Final rinse Make the desired selection and
Table 6-51: G2670 Program Mode Options (Cont. from Table 6-50) (Cont. on Table 6-52)
Programming
Select Temperature. Make the
desired selection and confirm
with the OK button.
Select Buzzer. Make the
desired selection and confirm
with the OK button.
Select Keypad tone. Make the
desired selection and confirm
with the OK button
Select Brightness. Press the
Dimmer or Brighter buttons as
appropriate to make the
desired selection and confirm
with the OK button
Select Memory. Make the
desired selection and confirm
with the OK button.
Select Dealer. Make the
desired selection and confirm
with the OK button.
Select Factory default. If all
parameters that can be
modified by the customer
(extras and settings) should be
reset to the standard settings,
press the OK button.
Select Temperatures then
select the desired sub-menu.
confirm with the OK button
confirm with the OK button
185
Display
The options °C and °F are available
The display shows the options Off,
Normal and Loud
An audible confirmation signal when a
button is pressed is active as standard.
This is indicated in the display by On. If
the function is not desired, select Off
The display brightness range has 17
steps shown in bar form. Standard
setting: 8.
The display shows the options On
(standard setting) and Off. The
memory function can be used to save
the most recently selected program.
The display shows the options Demo
program, Demo in cont. loop and
Demo with sound. In addition the
option Off is available to deactivate the
mode.
The display shows Reset factory
default settings?
The display shows the options Main
wash and Final rinse. This increases
the main wash or final rinse
temperature with a running time
extension.
The display shows the options Normal
and Increased
The display shows the options Normal
and Increased
Technical Information