G2630 - Service Mode - Miele G2000 Technical Information

Technical Information
6.5.1.2 G2630 – Service Mode
Initial requirements
1. Close the door.
2. Switch off the machine.
Accessing
1. Press and hold the Start/Stop button.
2. Switch on the machine.
3. Once the "Miele Welcome" display appears, release the Start/Stop button.
4. Immediately press and release the Start/Stop button 3 times and at the 3rd time
hold until the programmable functions appear in the display.
Note
If the Start LED does not switch off within approx. 10 sec., repeat the
accessing procedure.
5. Release the Start/ Stop button.
If the Start/Stop LED has not started to flash within approx. 4 sec., the accessing
procedure must be repeated.
Acknowledgement Indicator
Successful accessing of the Service mode is indicated by the LED's, which are all off
and the service options shown in the display.
Use the cursor buttons as appropriate to scroll the display.
Options
Refer to Table: 6-49.
G1000 / G2000 Dishwashers
178