Table of Contents
Advertisement
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Function
Intake/Drain
Lt.
Long Short
Pos. 38:
Model
variant
setting *1
3
8
Long Short
Pos. 39:
Country
variant
setting *1
3
9
Table 6-28: G1180 / G2180 Programming Mode Options (Continued from Table 6-27)
*1 If the electronic unit is exchanged during service work, it must be
follows: First set the country variant and model variant, then switch off the unit, repeat the
accessing procedure and set the machine height.
*2 After the changes are made, hold the program button until the Intake/Drain LED is solid.
*3 The variant Southern Europe covers the following countries: Portugal, France, The
Netherlands, Belgium and Great Britain.
Save and quit
Switch off the unit.
Programming
Press the Program
The Intake/Drain
button 38x.
LED flashes 3x
To change the
long and 8x briefly
setting, press the
intermittently.
Program button
and hold it until the
The SaniWash
Intake/Drain LED
LED is off = Gx18x
flashes. Then press
and Gx171; the
the Program button
SaniWash LED
to enter the desired
flashes = Gx170
setting changes. *2
Press the Program
The Intake/Drain
button 38x.
LED flashes 3x
long and 8x briefly
intermittently.
To change the
The flashing rhythm
setting, press the
of the SaniWash
Program button
LED shows which
and hold it until the
country variant is
Intake/Drain LED
set: 1x = Europe;
flashes. Then press
2x = Australia; 3x =
the Program button
USA; 4x = Japan,
to enter the desired
5x = Italy/Spain, 6x
setting changes. *2
= Southern Europe.
*3.
145
Flashing Rhythm of
Indication
SaniWash LED
Long Short Display
-
-
Long Short Display
-
-
-
-
-
-
Technical Information
-
P0
1
P1
1
EUR
2
AUS
3
USA
4
JPN
5
IT/SP
6
S/EUR
programmed as
Advertisement
Table of Contents
