Table of Contents
Advertisement
G1000 / G2000 Dishwashers
Table 6-41: G1470 / G2470 Programming Mode Options (Cont. from Table 6-40) (Cont. on Table 6-42)
Flashing
Rhythm of
Function
Delay start
LED
Long Short
Pos. 38:
Model
variant
setting *1
3
8
Long Short
Pos. 39:
Country
variant
setting (from
software
version ID
no. 818) *1
3
9
Table 6-42: G1470 / G2470 Programming Mode Options (Continued from Table 6-41)
*1 If the electronic unit is exchanged during service work, it must be
programmed as follows: First set the country variant and model
then switch off the unit, repeat the accessing procedure and
height. Then the on-site water hardness must be set.
*2 On models with software version ID no. 769, the "Resetting standard
function is at Pos.19.
*3 The SER variant includes the following countries: Portugal, France, Netherlands,
Belgium and Great Britain
Save and quit
Switch off the unit
Programming
Press the Gel
The display shows
button 38 times.
P and a digit
The Gel LED
alternately.
flashes 3 times
Individual setting
slowly and 8 times
possibilities depend
rapidly
on model and
intermittently. Press
whether a
circulation pump
the program button
as appropriate to
with slide shutter
make the desired
(WAW) and sensor
setting.
softener (SEH) are
fitted as follows:
Select setting P3 =
G147x, G247x
(without WAW, with
SEH).
Press the Gel
The display shows
button 39 times.
P and a digit
The Gel LED
alternately. The
flashes 3 times
following country
slowly and 9 times
versions can be
rapidly
set: P1 = EUR
intermittently. Press
(Europe); P2 =
the program button
AUS (Australia); P3
as appropriate to
= USA, P4 = JPN
make the desired
(Japan), P5 = I/E
setting.
(Italy/Spain), P6 =
SER (Southern
Europe) *3
.
.
167
Flashing Rhythm of
Display
Rinse LED
Long Short Display
-
Long Short Display
-
-
-
-
-
-
Technical Information
3
P3
1
P1
2
P2
3
P3
4
P4
5
P5
6
P6
variant,
set the machine
settings"
Advertisement
Table of Contents
