Miele G2000 Technical Information page 194

Technical Information
Function
Saving extras
System lock
activation
In operation lock Select In operation lock. Make the
Temperature
setting
Buzzer activation
/ deactivation and
volume setting
Audible
confirmation
signal activation /
deactivation
Brightness setting Select Brightness. Press the Dimmer
Contrast setting
Standby
activation /
deactivation
Memory
activation /
deactivation
Dealer
demonstration
mode activation.
Table 6-55: G2830 Programming Mode Options (Cont. from Table 6-54) (Cont. on Table 6-56)
Programming
Select Save extras. Make the desired
selection and confirm with the OK
touchpad.
Select System lock. Make the desired
selection and confirm with the OK
touchpad.
desired selection and confirm with the
OK touchpad.
Select Temperature. Make the
desired selection and confirm with the
OK touchpad.
Select Buzzer. Make the desired
selection and confirm with the OK
touchpad.
Select Keypad tone. Make the desired
selection and confirm with the OK
touchpad.
or Brighter buttons as appropriate to
make the desired selection and
confirm with the OK touchpad.
Select Contrast. Make the desired
selection and confirm with the OK
touchpad.
Select Standby. Make the desired
selection and confirm with the OK
touchpad. The display is switched off
after approx. 10 min. if no activity is
noted. Press any touchpad to
reactivate the display.
Select Memory. Make the desired
selection and confirm with the OK
touchpad.
Select Dealer. Make the desired
selection and confirm with the OK
touchpad.
194
G1000 / G2000 Dishwashers
Display
This function is activated as
standard. This is indicated in
the display by On. If the
function is not desired, select
Off.
This function is deactivated
as standard. This is indicated
in the display by Off. If the
function is desired, select On.
The display shows the setting
options Permitted *1 and Not
possible
The options °C and °F are
available
The display shows the
options Off, Normal and Loud
An audible confirmation signal
when a touchpad is pressed
is active as standard. This is
indicated in the display by On.
If the function is not desired,
select Off
The display brightness range
has 17 steps shown in bar
form. Standard setting: 8.
The display contrast range
has 17 steps shown in bar
form. Standard setting: 8.
The display shows the
options On and Not in current
program.
The display shows the
options On (standard setting)
and Off. The memory function
can be used to save the most
recently selected program.
The display shows the
options Demo program,
Demo in cont. loop and Demo
with sound. In addition the
option Off is available to
deactivate the mode.