Intel Trusted Execution Technology (Txt) Error; Sure Start Unable To Find Valid Bios Boot Block Image; Sure Start Has Identified A Problem (Manual Recovery Policy Set) - HP ZBook x2 Manual

Detachable workstation
Hide thumbs Also See for ZBook x2:
Table of Contents

Advertisement

Intel Trusted Execution Technology (TXT) Error

This computer has experienced a problem related to the Intel Trusted Execution Technology resulting in a failed
startup. The error occurs when all of the following are true:
The Intel Trusted Execution Technology (TXT) has been enabled on the computer.
Policies have been set to prevent startup if the BIOS measurement has changed.
The BIOS measurement has changed.
For more information about Intel TXT, go to
white-papers/trusted-execution-technology-security-paper.pdf.
A service event is required to resolve this issue.
NOTE:
The computer will attempt to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an "Off" or "Hibernated" state, lights associated with the
num lock
keys will both blink six times followed by a pause, then continue in a repeating pattern.

Sure Start unable to find valid BIOS Boot Block image

This computer has experienced a problem in locating a valid BIOS image, resulting in a failed startup. A service
event is required to identify the source of the error and take appropriate corrective action.
NOTE:
The computer will attempt to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an "Off" or "Hibernated" state, lights associated with the
num lock
keys will both blink seven times followed by a pause, then continue in a repeating pattern.

Sure Start has identified a problem (Manual Recovery Policy Set)

This computer has experienced a problem in locating a valid BIOS image, resulting in a failed startup. HP Sure
Start will normally repair this type of issue; however, on this computer HP Sure Start has been configured to
operate in manual mode key sequence. To proceed with the repair, press and hold the following keys:
+<UP arrow>+<DOWN
policy to automatic. If this error reoccurs, a service event is required to identify the source of the error and take
appropriate corrective action.
NOTE:
The computer will attempt to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an "Off" or "Hibernated" state, lights associated with the
num lock
keys will both blink eight times followed by a pause, then continue in a repeating pattern.
122 Chapter 6 Troubleshooting guide
http://www.intel.com/content/dam/www/public/us/en/documents/
arrow>. To avoid the need for this manual recovery step, set the HP Sure Start recovery
caps lock
and
caps lock
and
<ESC>
caps lock
and

Advertisement

Table of Contents
loading

Table of Contents