Table of Contents
Advertisement
3.
Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4.
Remove the display panel assembly (see
following components:
a.
Front-facing webcam/microphone module (see
on page
b.
Battery (see
c.
System board (see
Remove the speakers:
1.
Remove the four Phillips M2.0×3.5 screws (1) that secure the speakers to the back cover.
2.
Release the retention tape (2) that secures the speaker cable to the back cover.
3.
Remove the speakers (3).
NOTE:
properly install or damage to these isolators can result in degraded speaker performance.
Reverse this procedure to install the speakers.
56
Chapter 5 Removal and replacement procedures
42)
Battery on page
System board on page
When removing the speakers, make note of the location of the four rubber isolators (4). Failure to
Display panel assembly on page
Front-facing webcam/microphone module
39)
46)
30), and then remove the
Advertisement
Table of Contents
Troubleshooting
