Removal And Replacement Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP ZBook x2 Manual

4 Removal and replacement preliminary
requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
Case utility tool or other flat-bladed, plastic tool
●
Flat-bladed screw driver
●
Magnetic screw driver
●
Phillips P0 screw driver
●
● Phillips P00 screw driver
● Torx4 screw driver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the tablet, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
24 Chapter 4 Removal and replacement preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when