Commissioning The Device; Switching On The Device; Switching Off The Device - Siemens SIMATIC IPC PX-39A Operating Instructions Manual

Commissioning the device

4.1

Switching on the device

Requirements
• The power supply is connected.
Procedure
1. Switch the ON/OFF switch at the front of the device on ("ON" position when the symbol "_" is
pressed in).
Information on the position of the switch is available under "Interfaces and operator controls
for devices with 24 V DC power supply (Page 14)" or "Interfaces and operator controls for
devices with 100-240 V AC power supply (Page 15)".
Commissioning the installed Windows® operating system
You can find information on first startup of the device and commissioning the installed
Windows® operating system in the documentation.
See also "Important instructions and manuals for operating the device (Page 10)" for more on
this.
4.2

Switching off the device

Shutting down the operating system
For active operating system
• Shut down the operating system properly.
Result
The device is switched off but not fully disconnected from the line voltage.
52
Operating Instructions, 08/2022, A5E51699601-AA
4
SIMATIC IPC PX-39A