Device Maintenance And Repair; Repair Information; Maintenance Intervals - Siemens SIMATIC IPC PX-39A Operating Instructions Manual

Hide thumbs Also See for SIMATIC IPC PX-39A:
Table of Contents

Advertisement

Device maintenance and repair

7.1

Repair information

Risk due to unauthorized opening and improper repairs or expansions
Improper procedure when carrying out expansions may result in substantial damage to
equipment or endanger the user.
If you install or exchange system expansions and damage your device, the warranty
becomes void.
• For this reason, please observe the information in "Notes on device and system
7.2

Maintenance intervals

To maintain high system availability, we recommend the preventative replacement of those
PC components that are subject to wear. The table below indicates the intervals for this
replacement.
Component
Backup battery
SSD
1
Note
All drives are monitored by SIMATIC IPC DiagBase or SIMATIC IPC DiagMonitor software via
SMART status.
As soon as the Smart status of the data storage medium goes to "Not OK", a message is
generated in SIMATIC IPC DiagBase or SIMATIC IPC DiagMonitor or also during a system start
of the device. You should then back up your data and replace the drive.
SIMATIC IPC PX-39A
Operating Instructions, 08/2022, A5E51699601-AA
WARNING
extensions (Page 28)".
The interval for replacement of the flash drives (SSD) depends greatly on the type of use. A specific
interval cannot be given.
Replacement interval
5 years
Depending on the type of use
1
7
77

Advertisement

Table of Contents
loading

Table of Contents