Siemens SIMATIC IPC PX-39A Operating Instructions Manual page 76

Expanding and assigning parameters to the device
6.6 Drives
8.
9.
10. Plug the new M.2 NVMe SSD into the
11. Reassemble the slider completely with
12. Slide the slider into the drive bay until
13. Place the slider cover in the device and
Note
To ensure reliable operation of the devices with SIMATIC IPC Slider, the slider must be closed
with the cover.
76
Remove the M.2 NVMe SSD as shown
out of the slider.
Carefully separate the M.2 NVMe SSD
from the adapter plate.
adapter plate. Make sure that the coding
is aligned correctly.
the newly inserted M.2 NVMe SSD - in
reverse order to steps 8 to 5.
Only use the original screws.
If the card length has changed, the red
spacer must be moved to the suitable
screw position.
you hear the slider click into place.
fasten it with the Torx T10 type screw-
driver.
Operating Instructions, 08/2022, A5E51699601-AA
SIMATIC IPC PX-39A