Siemens SIMATIC IPC PX-39A Operating Instructions Manual page 73

Procedure - Installation
1. Insert the memory module
into the marked slot at an in-
cline with the contact side fac-
ing the motherboard.
2. Carefully press the memory
module into the contact strip
until the latches engage.
After insertion and removal
Close the device.
The new memory capacity will be automatically detected and displayed in the BIOS setup
when the device is switched on.
SIMATIC IPC PX-39A
Operating Instructions, 08/2022, A5E51699601-AA
Expanding and assigning parameters to the device
6.5 Memory modules
73