Commissioning The Device; Switching On The Device; Switching Off The Device - Siemens SIMATIC IPC BX-39A Operating Instructions Manual

Commissioning the device

4.1

Switching on the device

Requirements
• The power supply is connected.
Procedure
1. Switch the ON/OFF switch at the front of the device on ("ON" position when the symbol "_" is
pressed in).
Information on the position of the switch is available under "Interfaces and operating
elements (Page 13)".
Commissioning the installed Windows® operating system
You can find information on first startup of the device and commissioning the installed
Windows® operating system in the operating system documentation.
See also "Important instructions and manuals for operating the device (Page 9)" for more on
this.
4.2

Switching off the device

Shutting down the operating system
For active operating system
• Shut down the operating system properly.
Result
The "POWER" operating display is lit yellow.
The device is switched off but not fully disconnected from the line voltage.
46
Operating Instructions, 07/2022, A5E50715883-AA
4
SIMATIC IPC BX-39A