Standards And Approvals; Scope; Ce Marking - Siemens SIMATIC IPC PX-39A Operating Instructions Manual

Standards and approvals

10.1

Scope

Note
Scope
The possible approvals are described below. The approvals applicable to your device are
indicated on the nameplate.
10.2

CE marking

The device meets the general and safety-related requirements of the following directives and
conforms to the harmonized European standards (EN) published in the official gazettes of the
European Union:
• 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
The device is designed for the following areas of application corresponding to the CE
marking:
• 2014/35/EU "Electrical equipment designed for use within certain voltage limits" (Low-
Voltage Directive)
Conformance with this standard has been verified according to IEC/EN 61010-2-201
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Panel PC certificates
(http://support.automation.siemens.com/WW/view/en/10805572/134200).
102
Scope of application
Industry
The devices are compliant with the standards EN 61000-3-2 (Harmonics Current Emissions) and
EN 61000-3-3 (Voltage Fluctuations and Flicker).
1) Applies to devices with AC voltage supply
Requirement for
Interference emis-
sion
EN 61000-6-4
1)
Operating Instructions, 08/2022, A5E51699601-AA
10
Immunity to inter-
ference
EN 61000-6-2
.
1)
SIMATIC IPC PX-39A