Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 91

Appendix A Adjusting iQ settings
Option Values
Display
Screen Adjustment
Brightness 0–100
Auto Brightness On
Off
Advanced Display Options
[Various] [Various]
HDMI Output
Default resolution Auto
4K60
1080p60
720p60
640x480p60
HDMI Input
Advanced HDMI HDMI 1.0
Settings
HDMI 2.0
HDMI 3.0
OPS
VGA
smarttech.com/kb/171555
Function
Sets the overall brightness of
the image.
Enables or disables the
automatic brightness
adjustment depending on the
ambient light level.
Change display settings such
as brightness, color
temperature, contrast and so
on.
Sets the HDMI out resolution.
Sets the HDMI version, HDP
pulse width, and MHL setup
delay for each HDMI input.
Notes
If Auto Brightness is enabled
and the brightness slider is
moved quickly left or right,
the image on the screen
flickers. This will be fixed in a
future system software
release.
The advanced display
options available vary
depending on the display
model.
The HDMI output may not be
visible for several seconds
when you change the output
resolution on SMART Board
MX (V4 and V3) and MX Pro
(V4 and V3) models.
SMART Board MX (V4 and
V3N) models do not include
an HDMI out connector.
SMART Board MX (V4)
models do not include an
HDMI out connector.
SMART Board MX (V3N)
models do not include an
HDMI out connector.
You can also enable or
disable strictly conformant
HDMI Input DDC SDA timing
and forbid or allow HDCP 2.2
with older receivers.
User or system
setting
System
System
System
System
System
91