Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 66

Chapter 4 Maintaining the display
To turn the display off
1. Press the Power button
A slider appears on the screen.
2. Move the slider to the right.
3. Flick the switch beside the AC power inlet to the OFF (O) position.
Note
Wait at least 30 seconds before turning the display back on.
Press the Power button
To turn the display back on
Note
Touch is not available immediately after waking or turning on the display. Wait a few seconds, and
then the display will respond to touch.
1. Flick the switch beside the AC power inlet to the ON (I) position.
2. Press the Power button
Press the Power button
smarttech.com/kb/171555
on the front control panel or the remote control for five seconds.
on the front control panel for two seconds.
on the front control panel or the remote control.
on the front control panel.
66