Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 102

Appendix B Adjusting iQ Pro settings
Option Values
Display
Screen Adjustment
Brightness 0–100
Auto Brightness On
Off
Advanced Display Options
[Various] [Various]
HDMI Output
Default resolution Auto
4K60
1080p60
720p60
640x480p60
HDMI Input
Advanced HDMI HDMI 1.0
Settings
HDMI 2.0
HDMI 3.0
OPS
VGA
Go to the Input On
Lobby when there
Off
is no signal
Audio
Audio In
Volume Range slider
Built-in On
microphone
Off
smarttech.com/kb/171555
Function
Sets the overall brightness of the
image.
Enables or disables the automatic
brightness adjustment depending
on the ambient light level.
Change display settings such as
brightness, color temperature,
contrast and so on.
Sets the HDMI out resolution.
Sets the HDMI version, HDP pulse
width, and MHL setup delay for
each HDMI input.
When enabled, show the input
previews when there is no signal.
Sets the microphone's gain.
Enables or disables the display's
built-in microphone. The default is
on.
Notes
If Auto Brightness is enabled and the
brightness slider is moved quickly left
or right, the image on the screen
flickers. This will be fixed in a future
system software release.
[N/A]
The advanced display options
available vary depending on the
display model.
The HDMI output may not be visible
for several seconds when you change
the output resolution on SMART Board
MX (V4 and V3) and MX Pro (V4 and
V3) models.
SMART Board MX (V4 and V3N)
models do not include an HDMI out
connector.
SMART Board MX (V4) models do not
include an HDMI out connector.
SMART Board MX (V3N) models do not
include an HDMI out connector.
You can also enable or disable strictly
conformant HDMI Input DDC SDA
timing and forbid or allow HDCP 2.2
with older receivers.
[N/A]
MX-V4 Pro
MX-V4 Pro
102