Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 101

Appendix B Adjusting iQ Pro settings
Option Values
Automatically [N/A]
update the
touch controller
Power
Turn screen off after Disabled
1 min
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
Energy Saver
Go to energy Disabled
saving mode after
1 min
5 mins
30 mins
1 hour
1.5 hours
2 hours
5 hours
10 hours
Standby [N/A]
(Shutdown)
Networked [N/A]
Standby (Sleep)
External Inputs
Apply power On
settings even
Off
when displaying
an external video
source
smarttech.com/kb/171555
Function
Select to update whenever a new
version of the touch controller
firmware is released.
Sets the number of minutes of
inactivity before the display goes in
to an energy saving mode.
Sets the number of minutes of
inactivity before the display enters
an energy saving mode.
If selected, the display will turn off all
running components to achieve
maximum energy savings but
wakes up slower.
If selected, the display wakes up
faster and can be turned on up by a
Wake on LAN command from the
network.
If enabled, the display will enter an
energy saving mode even when an
external video input is connected.
Notes
[N/A]
The default is 60 minutes.
The default is 60 minutes.
This option is more energy efficient.
This option is the default for displays in
the EU.
For information about the display's
energy saving modes, see About
energy saving modes on page 37.
This option is less energy efficient.
This option is the default for displays
not in the EU.
For information about the display's
energy saving modes, see About
energy saving modes on page 37.
[N/A]
101