Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 25

Chapter 2 Installing the display
Factor Considerations
Power and other
connections
Visibility
smarttech.com/kb/171555
The location is close to:
l
A power outlet
o
A network outlet (if you plan to use a wired network connection)
o
A room computer (if you plan to connect a room computer)
o
External audio systems and other devices that you want to connect to
o
the display
Notes
If the location is not near a power outlet, consult an electrician for the
o
power setup you need.
Determine if you'll need additional equipment, such as power bars,
o
additional cables, or cable extenders.
The location is not where the mains power supply enters the building.
l
The display's screen is clearly visible to all users in the room. SMART
recommends users sit within a 178° viewing area:
Note
The viewing area depends on the display's resolution and a variety of
other factors. For more information, see the knowledge base article,
Recommended viewing distances and viewing angles for SMART Board
interactive displays.
25