Smart Technologies SMART Board MX Pro Series Installation And Maintenance Manual page 63

Chapter 3 Connecting computers and other devices
No. Connector
1 HDMI 1.4 out
(HDCP-compliant)
2 USB 2.0 Type-A
3 USB 2.0 Type-A
4 HDMI 2.0 in
5 HDMI 2.0 in
6 RJ45 (×2)
7 USB 2.0 Type-B
8 RS-232
9 Stereo 3.5 mm out
10 S/PDIF out
11 Stereo 3.5 mm in
12 VGA in
smarttech.com/kb/171555
Connects to
External monitor
Supported USB drives,
peripherals, and other
devices
Supported USB drives,
peripherals, and other
devices
HDMI 1 input
(video and audio)
HDMI 2 input
(video and audio)
Network
HDMI 1, HDMI 2, or VGA input
(touch)
Room control system
External audio system
Digital audio output
VGA input (audio)
VGA input (video)
Notes
This connector is HDCP-encrypted
HDMI.
Note
HDMI out is an optional feature.
Contact your authorized SMART
reseller (smarttech.com/where)
for further ordering instructions.
Connect a USB drive to update the
display's firmware.
Note
If you're troubleshooting an
issue with the display, connect a
USB mouse to navigate the
display's on-screen menu.
See page 49 and USB cables and
connectors.
See page 40 and HDMI cables
and connectors.
See page 40 and HDMI cables
and connectors.
See page 31 and Ethernet
(network) cables and connectors.
See page 40 and USB cables and
connectors.
See page 124 and RS-232 cables
and connectors.
See page 52 and Analog audio
cables and connectors.
See page 52 and Digital audio
cables and connectors.
See page 40 and Analog audio
cables and connectors.
See page 40 and VGA cables and
connectors.
63