[654] SXDP Assignment
Description
Disables or enables the Super EXtra Device Port (SXDP) feature for wired extensions.
Selection
• Jack number:
KX-TD816 – 01 through 16 (-1 / -2),
KX-TD1232 – 01 through 64 (-1 / -2),
(-1= first part, -2= second part, =all jacks)
• Enable / Disable
Default
All jacks – Enable
Programming
1.
Enter 654.
Display: SXDP Assign
2.
Press NEXT.
Display: Jack NO?
3.
Enter the jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display example: #01-1:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• After programmed, you must reset your system.
• To assign all jacks to one selection, press the
the contents programmed for the jack 01.
Features Guide References
Super EXtra Device Port (SXDP)
DECT Programming
5.3 Extension Programming
key in step 3. In this case, the display shows
349